Before ordering from a food packaging paper manufacturer in China, check the company in the national registry, look up every certificate in the issuer's database, confirm that test reports come from an accredited lab and name your grade and its reels or sheets, and audit fibre sources, chemicals and traceability on site or through a third party.
Key takeaways
- Start with identity: the national registry, the producing site and public safety alerts.
- Check every certificate in the issuer's own database, not from a PDF, and read its scope.
- Judge the grade by its declaration, accredited test reports and a grade-specific PFAS report.
- Audit inputs, traceability and change control, then tie the first delivery to the approved sample.
If you are shortlisting suppliers, send the grade, grammage, format and annual volume, and we will quote food packaging paper against your specification.
Why does sourcing food packaging paper from China need a supplier check?
Sourcing food packaging paper from China gives buyers a wide product range, but the quality and compliance evidence varies from one supplier to the next. A food-contact material has to meet the same EU requirements whatever its origin, and the business that places it on the market carries the risk if it does not.
The 12 checks below follow the order a sourcing team usually works in: identity, certification, compliance documents, material inputs and quality control, then the first delivery. Treat them as part of supplier approval, next to price, capacity and material quality, and record the compliance evidence for each material in the sourcing file.
Who exactly are you buying from?
Start with identity, because every later document has to match it. The 12 checks below fall into four groups: the company, its certificates, the grade's documents, and the paper itself. Table 1 at the end of the article summarises them.
1. Match the company to the national business registry
Ask for the supplier's full Chinese company name and its unified social credit code, then look them up in China's National Enterprise Credit Information Publicity System. Compare the registered name, business scope, address and status with the quotation and the certificates. A business scope that mentions only trading, or an address far from the production site, is a reason to ask more questions. From outside China the site can be blocked, so a sourcing agent can run the search.
2. Confirm which site makes the paper
Three addresses should agree: the site where the paper is made, the site that ships it, and the site named on the certificates and declaration. Many suppliers convert or trade material made elsewhere, which is fine if they say so and pass on the producer's documents.
3. Search public safety alerts
The EU's Rapid Alert System for Food and Feed has a public, searchable database called RASFF Window, with summary information on notifications from 2020 onwards [8]. Search it for the product type and the supplier's country. A past notification is not a verdict on a supplier, but it tells you which questions to ask about the corrective action taken.
Are the certificates genuine, and do they cover this paper?
A certificate proves something only when its number, holder, site and scope match your supplier and your grade. Check each one in the issuer's own database, not from a PDF the supplier sends.
4. Look up quality and food-safety management certificates
Accredited ISO certificates, such as ISO 9001 and ISO 22000, can be checked in IAF CertSearch, and FSSC 22000 keeps its own public register. Check:
- that the certificate holder is the company you are paying;
- that the address is the production site;
- that the scope names food packaging paper or food-contact paper, not just "trading";
- the issue and expiry dates.
If a certificate does not appear, ask the certification body directly before you rely on it.
5. Check packaging food-safety certification in the BRCGS Directory
The BRCGS Packaging Materials standard is common among suppliers to UK and European retailers. The BRCGS Directory lets buyers validate BRCGS certificates; it needs a free account. Read the scope carefully: it may cover one product group, such as food-contact paper rolls, and not others.
6. Verify forest claims before you print them
If you plan to put a forest certification logo or claim on your packaging, the supplier needs a valid chain-of-custody certificate covering that product group. Search the certificate code in the certification scheme's public database and check that it is valid and that the product type matches.
Watch for wording that no database can confirm. The German BfR does not approve products or issue certificates [4], so a "BfR certificate" should turn out to be a laboratory test report against BfR Recommendation XXXVI. Ask for that report.
Shortlisting a food packaging paper supplier?
Send the grade, grammage, format and annual volume. We quote food packaging paper against your specification.
Do the documents prove this grade is fit for food contact?
Certificates describe the company. These three checks are about the grade you are buying.
7. Read the declaration of compliance against the grade
A useful declaration names the grade and refers to Regulation (EC) No 1935/2004 and to good manufacturing practice under Regulation (EC) No 2023/2006 [1][2]. It should also state the conditions of use, such as food type, temperature and contact time, and carry a date and signature. Then compare it line by line with the quotation and the technical data sheet: same grade code, same producer, same grammage range.
8. Check who ran the tests
A test report is only as good as the laboratory and the sample. For each report, check:
- Accreditation. Laboratories in China are accredited by CNAS. Search the CNAS directory for the laboratory and check that the test method falls within its accredited scope. The ILAC signatory search shows which accreditation bodies are part of the international mutual recognition arrangement.
- Sample. The grade name, grammage and lot number match your material.
- Method. For German customers, a report against BfR Recommendation XXXVI should name the part and the edition date; the current edition is dated 1 October 2026 [3].
- Migration testing. For grades that touch fatty, moist or hot food, ask whether migration or extract testing was done, which food simulants, temperatures and times were used, and which test standard the laboratory followed. A report without those conditions cannot be matched to your use.
What one test report should show. Without the method and the test conditions, a report cannot be matched to your use.
9. Ask for a PFAS report for packaging sold into the EU
From 12 August 2026, Article 5 of the Packaging and Packaging Waste Regulation limits PFAS in food-contact packaging: 25 ppb for any single targeted PFAS, 250 ppb for the sum of targeted PFAS, and 50 ppm for total PFAS including polymeric PFAS [5]. The Commission's guidance describes how testing works, including total fluorine screening [6]. Northern Ireland applies Article 5; Great Britain does not [7].
Ask the supplier for a third-party PFAS report for the specific grade, from an accredited laboratory, rather than a general statement. The report should name the grade and the laboratory, and give targeted PFAS and total fluorine results.
Questions to send with your RFQ
- What is your full Chinese company name and unified social credit code?
- Which site makes the paper, which ships it, and which is named on the certificates?
- Does the signed declaration name this grade and state its conditions of use?
- Which accredited laboratory tested this grade, and is the method within its scope?
- Is there a third-party PFAS report for this grade, with targeted PFAS and total fluorine results?
- How are customers told in writing before a change of pulp, chemical, coating or site?
What should an audit of a food packaging paper manufacturer in China cover?
Look for evidence that the documents describe what actually happens. An on-site visit, a live video walk-through or a third-party audit can all work; for a new supplier of direct food-contact paper, a site visit or third-party audit before the first order gives the clearest view, because storage conditions, dust and odour are hard to judge on video.
10. Trace the fibre and chemical inputs
Ask to see goods-in records for pulp and recovered paper. If any recycled fibre is used, BfR Recommendation XXXVI restricts which recovered paper sorts may be used and bars some of them from direct food contact [3]. Then ask for the list of chemicals used on the paper machine, such as sizing agents, wet-strength agents and optical brighteners, and check that each one can be matched to an entry in the recommendation the supplier claims to meet [3].
On site, look at how pulp, recovered paper and chemicals are stored: labelled, covered, separated from non-food materials and kept off the floor.
11. Test the traceability and change control
Regulation (EC) No 1935/2004 requires traceability at every stage [1], and Regulation (EC) No 2023/2006 requires a quality assurance system, quality control and documentation [2]. In practice, pick one reel from a recent shipment and ask the supplier to trace it back to the production date, the machine run, the pulp lots and the test results. Ask how long retained samples are kept, and how customers are told in writing before a change of pulp, chemical, coating or site.
How do you confirm the first delivery matches what you approved?
The final check closes the loop between the approved sample and the paper that arrives.
12. Tie the shipment to the approved sample
Keep a sealed reference sample of the approved grade on both sides. On the first delivery, test the properties that matter for your use against the technical data sheet, such as grammage, water absorption and grease resistance, and check that the lot numbers on the reels match the test reports. A third-party pre-shipment inspection can do the same before the goods leave.
As an example, the product page for Kaifeng's unbleached kraft paper lists a grammage range of 30–98 g/m², moisture of 7.0% (+2/−1), thickness of 45–150 µm and a Cobb value of ≤ 40 g/m², each of which a delivery can be tested against.
Set acceptance limits per grade rather than one generic pass mark. Agree the product specification line by line before the first order: size or reel width and its tolerance, grammage, moisture, Cobb and the grease test, each with the test method. Quality control at goods-in then tests every material lot against that specification, and any deviation goes back to the supplier in writing.
Food packaging papers from Kaifeng
What do all 12 checks look like on one page?
Use this table as the working checklist for each new supplier: what to ask for, where to verify it and the warning sign that should stop the order.
Table 1. 12 checks at a glance
| # | Check | Ask for | Where to verify | Warning sign |
|---|---|---|---|---|
| 1 | Company identity | Full name, credit code | National Enterprise Credit Information Publicity System | Trading-only scope, address mismatch |
| 2 | Producing site | Site addresses | Certificates, declaration, quote | Three different addresses |
| 3 | Public alerts | Product type, country | RASFF Window | Notifications with no corrective action |
| 4 | Management certificates | Certificate numbers | IAF CertSearch, FSSC 22000 register | Holder or scope does not match |
| 5 | Packaging food-safety certificate | BRCGS site code | BRCGS Directory | Scope excludes your product |
| 6 | Forest claims | Chain-of-custody certificate code | The scheme's public certificate database | Product type not covered |
| 7 | Declaration of compliance | Signed declaration | Quote and data sheet | Generic wording, no conditions of use |
| 8 | Test reports | Report and lab details | CNAS directory, ILAC search | Method outside accredited scope |
| 9 | PFAS | Third-party report for the grade | Report itself | Statement only, no test |
| 10 | Fibre and chemical inputs | Goods-in records, chemical list | Site audit | Chemicals not matched to a list |
| 11 | Traceability and change control | Trace of one reel | Site audit | Trace cannot be completed |
| 12 | First delivery | Reference sample | Incoming inspection | Lot numbers do not match reports |
Which public registers help you run these checks?
Some of these databases need a free account, and some are slow from outside the issuing country.
Table 2. Public registers used in this checklist
| Register | What it covers | Address |
|---|---|---|
| National Enterprise Credit Information Publicity System | Chinese company registration | www.gsxt.gov.cn |
| IAF CertSearch | Accredited management-system certificates | www.iafcertsearch.org |
| FSSC 22000 public register | FSSC 22000 certificates | www.fssc.com/public-register |
| BRCGS Directory | BRCGS certificates (free account) | directory.brcgs.com |
| Forest certification databases | Chain-of-custody certificates | Each scheme's own public search |
| CNAS | Accredited laboratories in China | www.cnas.org.cn |
| ILAC signatory search | Accreditation bodies in the mutual recognition arrangement | ilac.org/signatory-search |
| RASFF Window | Summary information on EU RASFF notifications | webgate.ec.europa.eu/rasff-window |
Summary and next steps
- Start with identity: registry, producing site and public alerts.
- Look up every quality certificate in the issuer's database and read its scope.
- Judge compliance by the declaration, test reports and a grade-specific PFAS report.
- Audit material inputs, chemicals, traceability and change control before the first order.
- Tie the first delivery to the approved sample.
Keep one sourcing file per supplier: the certification checks, the compliance documents for each material, the test reports and the quality records from each delivery. When a supplier changes a grade, its pulp or its coating, the file shows which checks to repeat.
Ask for documents or discuss an audit
This checklist is published by Kaifeng Paper, a Chinese supplier of food packaging paper, and the same checks apply to us. To ask for documents or discuss an audit, send the grade and the documents you need.
- Name the grade and the documents you need: declaration, test reports, PFAS report or certificates.
- State the grammage, format and annual volume.
- We quote food packaging paper against your specification.
FAQs
What certifications should a food packaging paper supplier have for Europe?
EU law sets no mandatory certificate. It requires compliance with Regulation 1935/2004 and good manufacturing practice under Regulation 2023/2006. Buyers commonly ask for ISO 9001, a food-safety scheme such as ISO 22000, FSSC 22000 or BRCGS Packaging Materials, and chain-of-custody certification for any forest claim. Check each one's number and scope, and keep the compliance evidence in your sourcing file.
Does the BfR issue certificates for food-contact paper?
No. The German Federal Institute for Risk Assessment does not approve products or issue certificates. A supplier offering a "BfR certificate" should be able to show a laboratory test report against BfR Recommendation XXXVI, naming the part, the edition, the sample and the laboratory. That report is the evidence to keep on file.
How do I confirm a Chinese packaging paper factory is legitimate?
Search the company's full Chinese name or unified social credit code in the National Enterprise Credit Information Publicity System. Compare the registered name, business scope, address and status with the quotation and certificates. The site can be hard to reach from abroad, so a sourcing agent or inspection company can run the search.
Is a video audit enough for a new paper supplier?
It works well for screening and follow-up visits. For a new supplier of paper that touches food directly, a site visit or third-party audit before the first order is more reliable, because storage conditions, cleanliness, dust and odour are hard to judge through a camera. Video audits can then cover later reviews.
Are test reports from Chinese laboratories accepted in the EU?
Acceptance depends on the laboratory and the method, not on the country. Check that the laboratory is accredited, for example by CNAS, that the method is inside its accredited scope, and that the sample matches your grade. Whether a report is enough is for you, your customers and the competent authority to decide.
Is a GMP certificate required under Regulation 2023/2006?
No. The regulation requires good manufacturing practice, including a quality assurance system, quality control and documentation, but it does not create a certificate. Evidence comes from the supplier's records and from your audit. A third-party food-safety certification can support it, but it does not replace checking the records yourself.
How often should a paper supplier be re-audited?
The rules set no fixed interval, so base it on risk. Re-audit when the supplier changes a grade, raw material, coating or site, after a complaint, and when a certificate is renewed. Many sourcing teams also review the compliance file at least once a year, checking dates on declarations, test reports and quality certificates for each material.
Compliance note: whether a regulation applies depends on the final use of the packaging and on the competent authority in each market. This checklist is general guidance for buyers and does not replace a supplier approval procedure or legal advice.
Sources
- European Parliament and Council. "Regulation (EC) No 1935/2004 on materials and articles intended to come into contact with food". EUR-Lex, 2004. https://eur-lex.europa.eu/eli/reg/2004/1935/oj/eng Accessed Nov 2026.
- European Commission. "Commission Regulation (EC) No 2023/2006 on good manufacturing practice for materials and articles intended to come into contact with food". EUR-Lex, 2006. https://eur-lex.europa.eu/eli/reg/2006/2023/oj/eng Accessed Nov 2026.
- German Federal Institute for Risk Assessment (BfR). "XXXVI. Paper and board for food contact" (as of 01.10.2026). BfR, 2026. https://empfehlungen.bfr.bund.de/recommendations/360/pdf?locale=en Accessed Nov 2026.
- German Federal Institute for Risk Assessment (BfR). "Detailed explanation: BfR recommendations on food contact materials". BfR, 2025. https://www.bfr.bund.de/en/service/frequently-asked-questions/topic/detailed-explanation-bfr-recommendations-on-food-contact-materials/ Accessed Nov 2026.
- European Parliament and Council. "Regulation (EU) 2025/40 on packaging and packaging waste". EUR-Lex, 2025. https://eur-lex.europa.eu/eli/reg/2025/40/oj/eng Accessed Nov 2026.
- European Commission. "Commission Notice C/2026/3084, Guidance document for Regulation (EU) 2025/40 on packaging and packaging waste". Official Journal of the European Union, C series, 2026. https://eur-lex.europa.eu/eli/C/2026/3084/oj/eng Accessed Nov 2026.
- European Commission. "Commission Notice C/2025/946 on the application of Regulation (EU) 2025/40 in respect of Northern Ireland". EUR-Lex, 2025. https://eur-lex.europa.eu/eli/C/2025/946/oj/eng Accessed Nov 2026.
- European Commission. "RASFF – Food and Feed Safety Alerts". European Commission, 2026. https://food.ec.europa.eu/food-safety/rasff_en Accessed Nov 2026.







