Heated Tobacco Products
Ufopak™ Food Packaging Paper

Interleaving Paper Supplier for Steel, Printing Plates and Glass

Interleaving paper supplier for stainless steel processors, printing plate makers and glass processors, with four INNPAD™ grades. Stainless steel interleaving paper is 25–45 g/m², PS plate interleaving paper 30–37 g/m², CTP plate interleaving paper 35–50 g/m², and LCD substrate protection paper is supplied for glass. Paper is supplied in rolls, with a technical data sheet for each grade. The guide below lists what each application needs from the paper and which values to put in your specification.
Request a Quote
The Food Paper Range

Products in This Series

Compare the grades by grammage, format and end use, then send your specification for a quotation.

Kraft packaging series

Greaseproof series

Silicone coated series

Functional series

The Food Paper Range

Products in This Series

Compare the grades by grammage, format and end use, then send your specification for a quotation.

Buying Guide

Choose and Specify Your Grade

Stainless Steel Interleaving Paper

Paper between stainless steel coils and sheets must not scratch or stain the surface. Buyers check pH, water-soluble chloride and sulphate, cleanliness and strength.

Our stainless steel interleaving paper is produced under ISO 9001:2015, ISO 14001 and ISO 45001 certified management systems.

Bright-annealed and polished finishes are the most sensitive. For these, buyers often add a dust or particle check and a stack test under humid storage.

CTP and PS Plate Interleaving Paper

Plate interleaving paper protects the coated surface of printing plates during stacking and transport. Buyers check smoothness, dust, pH and moisture. PS plate interleaving paper is 30–37 g/m²; CTP plate interleaving paper is 35–50 g/m².

Plates with sensitive coatings may need lower moisture and very low dust; ask your plate supplier which values they recommend for interleaving paper.

Glass Interleaving Paper

Glass interleaving paper separates glass sheets and display substrates. Buyers check dust and particle release, surface uniformity and moisture. Our LCD substrate protection paper is supplied for this use.

For display glass, interleaving paper is often checked for surface resistance as well, because static can make sheets stick together.

What to Send an Interleaving Paper Manufacturer

Send the application, grammage, reel width and core, and the test methods you use. Values commonly specified:

  • pH of the water extract (ISO 6588).
  • Water-soluble chloride (ISO 9197) and sulphate (ISO 9198), with oven-dry or air-dry basis.
  • Grammage (ISO 536), thickness (ISO 534) and moisture (ISO 287).
  • Tensile strength in machine and cross direction (ISO 1924-2).

We reply with a quotation and the data sheet for the grade.

If you already use an interleaving paper, send its data sheet or a sample; matching it is the quickest route to an approved trial.

Also give the sheet or coil size, the stacking method and the expected storage time, since these decide the paper grammage and the reel or sheet format.

Approving Interleaving Paper for a New Line

Most buyers approve interleaving paper with a trial before regular orders:

  • Run the paper on the actual coil, plate or glass line, at normal speed and tension.
  • Store test packs for the expected transit and storage time, then inspect the surface for marks, staining or adhesion.
  • Compare later deliveries with the approved trial using certificates of analysis.

Interleaving paper that works on one product may not suit another. Run a separate trial for each surface finish, coating or glass type.

Humid storage and long sea transit are the hardest conditions for interleaving paper, so include them in your trial plan. Ask how batches are traced, so a surface defect found later can be linked back to a reel.

Capabilities

Matched to Your Converting Line

Send the machine type, format and end use with your enquiry, so the grammage, roll width and core can be matched to your line.

Kraft paper rolls
Format Options

Format Options

Jumbo rolls for flexo printing, slit reels for automated wrapping, and cut sheets in your size.

Format Options

Format Options

Jumbo rolls for flexo printing, slit reels for automated wrapping, and cut sheets in your size.

Format Options

Format Options

Jumbo rolls for flexo printing, slit reels for automated wrapping, and cut sheets in your size.

Format Options

Format Options

Jumbo rolls for flexo printing, slit reels for automated wrapping, and cut sheets in your size.

FAQ

Frequently Asked Questions

Chloride and sulphate ions can cause pitting and staining on stainless steel when moisture is present. Ask for water-soluble values, the test method and the calculation basis.
Our ISO 9001:2015, ISO 14001 and ISO 45001 certificates cover stainless steel interleaving paper, together with food packaging papers and tipping base paper.
Stainless steel interleaving paper is commonly 25–45 g/m², depending on coil weight and the processing line. Ours is available across that range.