Products in This Series
Compare the grades by grammage, format and end use, then send your specification for a quotation.
Kraft packaging series
Greaseproof series
Silicone coated series
Products in This Series
Compare the grades by grammage, format and end use, then send your specification for a quotation.
Buying Guide
Choose and Specify Your Grade
Industrial Barrier Paper
Industrial barrier paper is an industrial packaging paper for coating and spraying lines, available from 30 to 80 g/m². The data sheet lists tensile strength, tear resistance, burst strength and water absorption by grammage.
Coating and spraying lines need paper that lies flat, takes the coating evenly and holds its strength under tension. Agree which side is coated, since water absorption can differ between the two sides.
Rustproof Base Paper for VCI Coating
Rustproof base paper (40–60 g/m²) is supplied to converters who apply volatile corrosion inhibitor (VCI) coatings. The converter makes and tests the finished VCI paper.
VCI papers protect metal by releasing inhibitor vapour inside the pack, so the base paper's porosity, moisture and strength all matter to the converter. The converter usually sets the base paper specification together with the coating supplier.
Specifications to Agree with Your Supplier
For coating lines, agree the values that affect coating pick-up and metal contact, and the test method for each:
- Grammage (ISO 536) and thickness (ISO 534).
- Water absorption, Cobb (ISO 535), on the side to be coated.
- pH of the water extract (ISO 6588) and water-soluble chloride (ISO 9197) for paper in contact with metal.
- Tensile strength (ISO 1924-2) and burst strength (ISO 2758).
- Reel width, core diameter and outer diameter.
Tell us how the paper will be coated or used, and the values your current paper meets. If it replaces a grade you already use, send its data sheet or a sample with your enquiry.
Paper in Contact with Metal
Steel and other metals can stain or corrode where they touch paper that holds acids, salts or moisture. For paper that will touch metal, buyers usually ask for:
- A neutral pH of the water extract, measured to ISO 6588.
- Low water-soluble chloride and sulphate, with the test method and whether results are on an oven-dry or air-dry basis.
- A moisture content that stays stable in storage and transport.
- Clean, even surfaces without hard particles that could mark polished metal.
Finished VCI paper is tested by the converter that applies the inhibitor; the base paper supplier provides the values for the uncoated sheet.
Agree retained samples and certificates of analysis for each batch.
Paper that touches bare metal is usually checked for chloride, sulphate and pH of the water extract, because these can start corrosion during storage and sea transport.
How to Request a Quote
Send the grade, grammage, reel dimensions, the coating you will apply, annual volume and destination. We reply with a quotation and the data sheet.
Matched to Your Converting Line
Send the machine type, format and end use with your enquiry, so the grammage, roll width and core can be matched to your line.
Format Options
Jumbo rolls for flexo printing, slit reels for automated wrapping, and cut sheets in your size.
Format Options
Jumbo rolls for flexo printing, slit reels for automated wrapping, and cut sheets in your size.
Format Options
Jumbo rolls for flexo printing, slit reels for automated wrapping, and cut sheets in your size.
Format Options
Jumbo rolls for flexo printing, slit reels for automated wrapping, and cut sheets in your size.
